Bepto
EN
ENEnglish繁中繁體中文ESEspañolARالعربيةFRFrançaisITItalianoPTPortuguêsRUРусскийDEDeutschJA日本語VITiếng ViệtKO한국어THไทยTRTürkçe
Request a Quote
EN
ENEnglish繁中繁體中文ESEspañolARالعربيةFRFrançaisITItalianoPTPortuguêsRUРусскийDEDeutschJA日本語VITiếng ViệtKO한국어THไทยTRTürkçe

AI Search

Tell us in one sentence about your application or question to search related products, technical articles and calculators.

Engineering Calculator · 099

Locknut Across-Flats Clearance Calculator

Calculate total and per-side clearance around a locknut from available width and across-flats dimension.

Installation planning
Start calculationReview the method

Live calculation

Enter the known values.

Units remain visible beside every field and result. Change any input to recalculate immediately in your browser.

01

Inputs

02

Results

Total width clearance13mm
Clearance per side6.5mm
Width utilization71.11%

Formula
clock,side=Wa−AFl2c_{\mathrm{lock,side}}=\frac{W_a-AF_l}{2}

The calculation runs locally in this browser. Values are not submitted or stored by this tool.

Direct answer

What this result means

Calculate total and per-side clearance around a locknut from available width and across-flats dimension. The relationship cside = (Wavailable − AF) / 2 ties available installation width and locknut across-flats size directly to the reported result. Locknut clearance is assessed from across-flats width with equal side space. Treat the value as a transparent preliminary calculation, then compare it with the actual cable-entry assembly and current product documentation.

Locknut Across-Flats Clearance Calculator engineering relationship diagramcside = (Wavailable − AF) / 2 defines the calculation shown here. Locknut clearance is assessed from across-flats width with equal side space. Keep the entered units with the result so another reviewer can reproduce the method. This dedicated schematic represents locknut af clearance and is not to scale.LOCKNUT ACCESS · TOOL 099Available installation wid…Total width clearance
Calculator-specific engineering relationship diagram — schematic, not a product drawing, and not to scale.

Formula & theory

Make the assumptions visible.

cside = (Wavailable − AF) / 2 defines the calculation shown here. Locknut clearance is assessed from across-flats width with equal side space. Keep the entered units with the result so another reviewer can reproduce the method.

Calculation relationship
clock,side=Wa−AFl2c_{\mathrm{lock,side}}=\frac{W_a-AF_l}{2}

cside = (Wavailable − AF) / 2 defines the calculation shown here. Locknut clearance is assessed from across-flats width with equal side space. Keep the entered units with the result so another reviewer can reproduce the method.

Variables

WavailableAvailable installation widthmm
csideClearance per sidemm

Use sequence

From measurement to review

  1. Confirm available installation width and locknut across-flats size from a controlled drawing, measurement or project document.
  2. Apply cside = (Wavailable − AF) / 2 with consistent units and keep the entered values beside the result.
  3. Use total width clearance only after checking locknut orientation, corner envelope, tool size, panel return and neighbouring hardware.

Limits

What this calculation does not confirm

  • Locknut clearance is assessed from across-flats width with equal side space.
  • Inputs describe one defined operating or measurement condition and use mutually consistent units.
  • The result does not by itself confirm product suitability, standards compliance, ingress performance or installation approval.

Related articles

Continue the check

View all 130 calculators
098

Unused Entry Plug Quantity Calculator

Calculate whole-piece plug quantity from total openings after used and intentionally reserved openings are deducted.

Open calculator →100

Cable Entry Drainage Slope Calculator

Convert vertical drop and horizontal run into slope percentage, angle and gradient ratio for routing review.

Open calculator →

Calculator FAQ

Use the number without losing the engineering context.

These answers clarify what the tool calculates and where a product-specific review still begins.

01Calculator guidanceHow does the locknut across-flats clearance calculator calculate total width clearance?

The tool applies cside = (Wavailable − AF) / 2 to available installation width, locknut across-flats size. Locknut clearance is assessed from across-flats width with equal side space. Keep the displayed units with the result so the calculation can be repeated.

02Calculator guidanceWhat does total width clearance show for this locknut access review?

Calculate total and per-side clearance around a locknut from available width and across-flats dimension. It is a preliminary engineering value, not confirmation of a cable-gland model, standards compliance or installation approval.

03Calculator guidanceWhat should be checked about locknut orientation before using the locknut across-flats clearance calculator result?

The equation does not model locknut orientation, corner envelope, tool size, panel return and neighbouring hardware. Confirm those conditions against the actual cable-entry assembly, applicable requirement and current product documentation.

Product selection support

Connect the calculation with cable-entry product options.

Bepto Cable Glands can help relate a preliminary result to the product family and current model information for your application. You can start with the details you have; a complete drawing package is not needed to ask a question.

Request product support