Bepto
EN
ENEnglish繁中繁體中文ESEspañolARالعربيةFRFrançaisITItalianoPTPortuguêsRUРусскийDEDeutschJA日本語VITiếng ViệtKO한국어THไทยTRTürkçe
Request a Quote
EN
ENEnglish繁中繁體中文ESEspañolARالعربيةFRFrançaisITItalianoPTPortuguêsRUРусскийDEDeutschJA日本語VITiếng ViệtKO한국어THไทยTRTürkçe

AI Search

Tell us in one sentence about your application or question to search related products, technical articles and calculators.

Engineering Calculator · 074

Diameter Thermal Expansion Calculator

Estimate circular feature diameter change and final diameter from expansion coefficient and temperature change.

Thermal & material change
Start calculationReview the method

Live calculation

Enter the known values.

Units remain visible beside every field and result. Change any input to recalculate immediately in your browser.

01

Inputs

02

Results

Diameter change0.01mm
Final diameter20.01mm
Diameter change0.07%

Formula
ΔDthermal=αDD0ΔT\Delta D_{\mathrm{thermal}}=\alpha_DD_0\Delta T

The calculation runs locally in this browser. Values are not submitted or stored by this tool.

Direct answer

What this result means

Estimate circular feature diameter change and final diameter from expansion coefficient and temperature change. The relationship ΔD = αD0ΔT ties initial diameter, expansion coefficient and temperature change directly to the reported result. The diameter expands freely and uniformly. Treat the value as a transparent preliminary calculation, then compare it with the actual cable-entry assembly and current product documentation.

Diameter Thermal Expansion Calculator engineering relationship diagramΔD = αD0ΔT defines the calculation shown here. The diameter expands freely and uniformly. Keep the entered units with the result so another reviewer can reproduce the method. This dedicated schematic represents diameter thermal expansion and is not to scale.DIAMETER CHANGE · TOOL 074Initial diameterDiameter change
Calculator-specific engineering relationship diagram — schematic, not a product drawing, and not to scale.

Formula & theory

Make the assumptions visible.

ΔD = αD0ΔT defines the calculation shown here. The diameter expands freely and uniformly. Keep the entered units with the result so another reviewer can reproduce the method.

Calculation relationship
ΔDthermal=αDD0ΔT\Delta D_{\mathrm{thermal}}=\alpha_DD_0\Delta T

ΔD = αD0ΔT defines the calculation shown here. The diameter expands freely and uniformly. Keep the entered units with the result so another reviewer can reproduce the method.

Variables

D0Initial diametermm
ΔTTemperature changeK
ΔDDiameter changemm

Use sequence

From measurement to review

  1. Confirm initial diameter and expansion coefficient from a controlled drawing, measurement or project document.
  2. Apply ΔD = αD0ΔT with consistent units and keep the entered values beside the result.
  3. Use diameter change only after checking material coefficient, datum temperature, diameter tolerance and whether radial constraint changes the response.

Limits

What this calculation does not confirm

  • The diameter expands freely and uniformly.
  • Inputs describe one defined operating or measurement condition and use mutually consistent units.
  • The result does not by itself confirm product suitability, standards compliance, ingress performance or installation approval.

Related articles

Continue the check

View all 130 calculators
073

Linear Thermal Expansion Calculator

Estimate linear dimension change and final length from initial length, expansion coefficient and temperature change.

Open calculator →075

Differential Thermal Expansion Calculator

Compare free linear expansion of two materials over one reference length and temperature change.

Open calculator →076

Thermal Clearance Margin Calculator

Estimate final radial or diametral clearance after differential thermal expansion of a component and housing.

Open calculator →

Calculator FAQ

Use the number without losing the engineering context.

These answers clarify what the tool calculates and where a product-specific review still begins.

01Calculator guidanceHow does the diameter thermal expansion calculator calculate diameter change?

The tool applies ΔD = αD0ΔT to initial diameter, expansion coefficient, temperature change. The diameter expands freely and uniformly. Keep the displayed units with the result so the calculation can be repeated.

02Calculator guidanceWhat does diameter change show for this diameter change review?

Estimate circular feature diameter change and final diameter from expansion coefficient and temperature change. It is a preliminary engineering value, not confirmation of a cable-gland model, standards compliance or installation approval.

03Calculator guidanceWhat should be checked about material coefficient before using the diameter thermal expansion calculator result?

The equation does not model material coefficient, datum temperature, diameter tolerance and whether radial constraint changes the response. Confirm those conditions against the actual cable-entry assembly, applicable requirement and current product documentation.

Product selection support

Connect the calculation with cable-entry product options.

Bepto Cable Glands can help relate a preliminary result to the product family and current model information for your application. You can start with the details you have; a complete drawing package is not needed to ask a question.

Request product support